900mm x 900mm L-Shaped Grab Bar, Stainless Steel, RIGHT Hand, Ontario Building Code CompliantCanadian Inventory Only
- Stainless Steel Accessible Grab Bar
- 36" x 36" L-Shaped Bar with a 1 ½” Diameter
- Right-hand Configuration, Ontario Building Code
- Canadian Inventory Only
These high-quality L-shaped grab bars are made of stainless steel and have dimensions of 36” horizontal by 36” vertical. With a 1½” diameter, these grab bars have a clean satin finish. Order these heavy duty grab bars in a Right or Left-hand configuration.
L-shaped grab bars comply and exceed federal guidelines when properly installed. Meet Ontario Building code amendments requiring an L-shaped grab bar in public buildings by ordering from our Canadian stock.
Grab Bar Features:
- 36" vertical by 36" horizontal dimensions
- 1½” diameter
- Right-hand configuration (Left also available)
- L-shaped for Ontario Building code compliance
- Made of Stainless Steel
- Clean satin stainless finish
How the Ontario Building Code changes affect barrier-free washrooms
From the website at mah.gov.on.ca
"On December 27, 2013, Ontario Regulation 368/13 was filed to amend the new 2012 Building Code, O.Reg. 332/12.The effective date of the amendment is January 1, 2015."
Regarding barrier-free washrooms, the key changes include:
- Requirements for power door operators at the entrance door to all barrier-free and universal washrooms Amended mounting height and location requirements for washroom accessories such as towel dispensers and hand dryers
- New fold-down grab bar design options to allow for transfer space on both sides of the water closet
- Requiring an L-shaped grab bar in all cases and removing the option to provide a diagonal grab bar
- Increased minimum clear floor area in barrier-free washroom stalls required to allow for turning space
- At least one universal toilet room would also be required in all buildings, and, for multi-storey buildings, at least one for every three floors.
- Space for an adult change table will have to be provided in all universal toilet rooms except in buildings under 300 square metres in building area.
The code for Showers and Bathtubs
ONTARIO REGULATION 191/14 made under the BUILDING CODE ACT,
Amending O. Reg. 332/12 (BUILDING CODE)
18.104.22.168. Showers and Bathtubs
(2) A barrier-free shower required by Sentence (1) shall...
(f) have a wall mounted continuous L-shaped grab bar conforming to Sentence 22.214.171.124.(7) located on the same wall as the controls, with the horizontal component of the grab bar,
(i) mounted not more than 850 mm above the finished floor, and
(ii) located so that the end of the horizontal component is within 100 mm from the edge of the shower seat,
(4) Individual bathtubs that are provided for the use of patients or residents in buildings of Group B, Division 2 or 3 occupancy shall have...
(c) unless the bathtub is free-standing, a continuous L-shaped grab bar conforming to Sentence 126.96.36.199.(7) with 900 mm long horizontal and vertical components mounted with,
(i) the horizontal component located not less than 150 mm and not more than 200 mm above and parallel to the rim of the bathtub, and
(ii) the vertical component located not less than 300 mm and not more than 450 mm from the control end of the bathtub...